NTLite not removing components

H

h4m

New Member
Messages
7
Reaction score
1
Im having some weird issues with NTlite at the moment, so for starters im using the same preset ive always used but whats weird is, whenever i create the ISO i somehow have an extra like 2G on my final install as well as the iso being 500MB larger. Its also not removing the apps fully and it seems other settings are not sticking. I attached a photo of the components its not removing. I also attached a photo of the final install size, normally its about 10000mb not 12000mb. I have no idea why it seems to be acting this strange, i have changed nothing with my config either. It seems like some settings are not being applied. i mean if this is normal thats fine, it just wasn't doing this before.

Also attached is the preset.

Thanks.
 

Attachments

Hi,

before testing this, it's not clear to me what to compare.
Have you confirmed that previous version 2.3.4.8658 with this preset is having a much smaller ISO than the latest version 2.3.4.8673/4, or it started happening with the same version that was smaller before?
In other words am I comparing a two different versions of the tool, or trying to guess what could be changed on your side, but it wasn't the tool?

Thanks.
 
nuhi said:
Hi,

before testing this, it's not clear to me what to compare.
Have you confirmed that previous version 2.3.4.8658 with this preset is having a much smaller ISO than the latest version 2.3.4.8673/4, or it started happening with the same version that was smaller before?
In other words am I comparing a two different versions of the tool, or trying to guess what could be changed on your side, but it wasn't the tool?

Thanks.
Click to expand...
I have not fully tested that. But with 2.3.4.8658 i never had this issue with it not removing apps or ISO size, once i updated i started running into this problem
Nothing on my end has changed really aside from updating the tool
 
So i did a little testing of my own.

I actually had an exe saved to a flash drive of 2.3.4.8658 and loaded up my preset and applied. Attached is a screen of the size it removed, apprx 3GB or so

I then updated the software to 2.3.4.8674 and loaded a fresh win10 and applied the same preset and settings. Attached is a screen of the size removed as well apprx 2GB or so.

There is a difference in the size and when reloading the ISO on 2.3.4.8658 the apps were completely removed and on 2.3.4.8674 the apps were not removed. It also removes like 7000 or so more files on 2.3.4.8658.

I also noticed (and this is minor) that the cancel button on 2.3.4.8658, when completed making an iso, would gray out. But on 2.3.4.8674 the cancel button stays red. Something small and idk if its intentional either but just pointing it out.

I hope this kinda helps.
Thanks.
 
Huh, thanks for notifying about this, both fixed, please try build 8675+.
 
nuhi
Can confirm it is now working and the components are fully removed.
Also the cancel button is grayed out like normal.

Thank you for fixing this!
 
You must log in or register to reply here.
Back
Top